Le Raspberry Pi PoE HAT rencontre des problèmes d’alimentation USB

Le Raspberry Pi PoE HAT rencontre des problemes dalimentation USB
Le Raspberry Pi PoE HAT rencontre des problemes dalimentation USB

le HAT Power-over-Ethernet récemment publié par Raspberry Pi a été conçu pour permettre au Raspberry Pi d’être alimenté par un seul câble Ethernet à alimentation électrique. Destiné principalement au marché industriel, ce HAT utilise le connecteur supplémentaire à 4 broches du 3B + pour recevoir l’alimentation du câble et comprend un ventilateur pour le refroidissement.

Cependant, les utilisateurs du HAT ont rapidement rencontré des problèmes et les a signalés sur les forums Raspberry Pi. Les problèmes se résument à des ports USB sous-alimentés lors de l’utilisation du HAT. Dans un entretien avec The Register, Eben Upton de Raspberry Pi Trading a expliqué la cause des problèmes et pourquoi ils n’ont pas été détectés lors des tests (apparemment limités). RPT propose désormais des remboursements par le biais des fournisseurs pour les unités retournées, bien que des suggestions pour résoudre le problème matériel aient également été données (pas pour les âmes sensibles!)

Pour lire l’histoire complète, rendez-vous sur The Register.

Vous pouvez voir le problème illustré dans la vidéo EEVBlog ci-dessous. Merci à AB Electronics d’avoir repéré cette!

YouTube video

  • Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
    The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable. Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5 PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS) Onboard high speed active cooling fan, with metal heatsink, better heat dissipation Provide e-user manual, please check the manual carefully before using!
  • Power over Ethernet (PoE) HAT pour Raspberry Pi 4B/3B+, 802.3af-Conforme, 5V 2.5A DC Sortie, Ventilateur de Refroidissement Intégré PoE HAT, Compatible avec Boîtier Officiel Raspberry Pi 4B/3B+
    PoE HAT supports Raspberry Pi 4B/3B+, Tailored for Raspberry Pi 4B/3B+ official case PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant Power over Ethernet HAT expansion board onboard high speed active cooling fan, better heat dissipation Fully isolated switched-mode power supply (SMPS) By using this PoE HAT (type D) and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • DSLRKIT Power Over Ethernet PoE Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4B 3B+ 3B Plus
    Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector Maximum.12Watt DC5V 2.5A With 1.5KV isolation Compatible unsolicited Passive PoE switch