DIY Raspberry Pi GPIO LED et carte de commutateurs

DIY Raspberry Pi GPIO LED et carte de commutateurs

Un blogueur de PiecesOfPi.co.uk a décidé qu’il (ou, en fait, elle) voulait construire une carte GPIO pour eux-mêmes. Donc, ils ont pris un morceau de stripboard, des LED et quelques interrupteurs et c’est exactement ce qu’ils ont fait. Il a posté tous les diagrammes afin que vous puissiez reproduire le tableau, bien qu’il n’ait pas inclus beaucoup d’aide avec le logiciel. Cela devrait être assez facile de faire quelque chose avec Python ou ScratchGPIO, cependant. Lisez tout a propos de ça ici.

  • Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W/Zero, Terminal Block Hat, GPIO Status LED
    Compatible models -> Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Note: NOT compatible with Raspberry Pi 400.) GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level. Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. Terminal block and header -> Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54mm / 0.1in pitch. GPIO name -> The BCM numbering name of each GPIO is printed next to the port.
  • ARCELI Carte d'extension RPi GPIO Breakout + Câble Ruban + Adaptateur GPIO Type T assemblé 20cm FC40 Câble Ruban Plat 40 Broches pour Raspberry Pi 3 2 Modèle B & B + SC05
    RPi GPIO assemblé avec un câble ruban de 40 "pour Raspberry pi 3B, Raspberry pi 2 modèle B, Raspberry pi 1B +, Raspberry pi 1A +, Raspberry pi zéro W, Raspberry pi zéro 1 * câble ruban arc-en-ciel 40 broches GPIO 40P 1 * carte d'extension GPIO 40 broches sont étiquetées pour un prototypage facile L'adaptateur GPIO Plus pour Raspberry Pi B +, Raspberry Pi 2, Raspberry Pi n'est pas inclus.
  • GeeekPi Raspberry Pi Micro GPIO Terminal Block Breakout Board Module with LED,Raspberry Pi LED Screw Terminal Hat pour Raspberry Pi 4B/3B+/3B/2B
    Compatible with all Raspberry Pi series: for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero W, Pi Zero 2 W All 40pins of Raspberry Pi are transferred out by screw terminals, which is convenient for cable access. Does not occupy other space, very convenient when doing DIY circuits. Easy to assemble,GPIO LED indicator,Stable connection for wiring circuit 2x20 positions header connect to Raspberry Pi board,Terminal block pitch is 2.54mm/0.1". GPIO function mark sticky for easy identification. wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper. Package includes:1 x Mini Terminal Breakout Board with LED For Raspberry Pi;1 x Silk-Mark Color Stickers;1 x Acrylic Pannel;4 x M2.5 Copper Pillar;6 x M2.5 Screw;2 x M2.5 Double Pass Copper Pillar; 2 x Nut; 1 x Screw Driver Technical Support: https://wiki.52pi.com/index.php?title=EP-0168