Notifications de tremblement de terre avec un Raspberry Pi

earthquakepi

Russell Grokett a pris un Raspberry Pi et alimenté les données du USGS (United States Geological Survey). Il a ensuite mis une boîte autour du Pi et ajouté un écran LCD et quelques moteurs. Lorsqu’un tremblement de terre est détecté, l’écran LCD affiche des informations sur le tremblement de terre et la boîte bourdonne / claque en fonction de l’ampleur de la perturbation. C’est un beau projet et il a tout écrit ici. Tout le code est disponible ici pour que vous puissiez créer votre propre moniteur de tremblement de terre.

  • Raspberry Pi® Platine dextension Raspberry Pi®
    Pile RTC pour Raspberry Pi 5 · Batterie Panasonic ML-2020 au lithium-manganèse-Dioxyde · Capacité nominale (selon la fiche technique publique) : 45 mAh · Equipé d'une embase compatible pour le connecteur de batterie RTC Raspberry Pi 5 · Ruban adhésif double face pour la fixation sur un boîtier ou un revêtement Cette pile est fournie avec un port compatible pour le branchement spécial de la pile de secours sur la carte Raspberry Pi (étiqueté « BAT », à côté du port USB-C) Le ci de gestion de l'alimentation utilisé sur le Raspberry Pi 5 intègre une horloge en temps réel et un circuit de charge pour ces piles boutons qui peuvent alimenter l'horloge alors que l'alimentation secteur est coupée et qui recharge également la batterie lorsque l'alimentation est rétablie La pile est fournie avec un tampon adhésif double face pour la fixer à l'intérieur d'un boîtier ou à un autre endroit approprié Ce texte a été traduit par une machine
  • Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W/Zero, Terminal Block Hat, GPIO Status LED
    Compatible models -> Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Note: NOT compatible with Raspberry Pi 400.) GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level. Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. Terminal block and header -> Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54mm / 0.1in pitch. GPIO name -> The BCM numbering name of each GPIO is printed next to the port.
  • Geekworm 2x20 40 Pin Stacking Female Header Kit for Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B / 2B / B+ / Zero (Zero W) (4 Specifications), Raspberry Pi GPIO Stacking Header/Extender
    Packing List: 2 * 2x20 Female Header (Pin Len: 12mm), 2 * 2x20 Female Header (Pin Len: 10.7mm), 2 * 2x20 Female Header (Pin Len: 5.5mm), 2 * 2x20 Pin Header The 2x20 Pin Header is for Raspberry Pi Zero / Zero W. Material: Insulated plastic, hard metal pin Application: Widely be used in Raspberry Pi DIY project, such as for electronic circuit, PCB circuit board etc. electronic project Stacking header for Raspberry Pi 4, Pi 3, Pi 2, Pi Model B+, Pi A+, Pi Zero, Pi Zero W